Dust Containment Unit Installation Guide
- Siquay Solutions
Thank you for choosing our Dust Containment Unit! We appreciate your commitment to a cleaner and more sustainable future. Regularly cleaning your filters not only ensures optimal performance but also extends the life of your filters, reducing waste.
Items on this page
Items needed
- Air Filter Cleaner Tool Kit
- Dust Containment Unit
- H-class Vacuum
Safety Precautions:
- Fragile Unit: Handle the dust containment unit with care. It can shatter if dropped.
- Bolt Tightening: Do not over tighten bolts during installation, as this can crack the plastic.
- Respiratory Protection: Always wear a P2 mask when working with the unit, even though it captures primary dust.
- H-Class vacuum must be used to capture dust.
Installation Steps
- Positioning: Place the dust containment unit in the desired location, ensuring the elbow at the base is facing the side where you’ll position the vacuum system.
- Secure to Ground: Use 10mm Tru bolts to securely attach the unit to the ground. Avoid over tightening.
- Connect Vacuum: Place the vacuum system next to the unit and fit the hose with the pipe into the elbow at the base. You can use tape here to ensure a tight connection between the Dust Containment Units elbow fitting and the vacuum nozzle.
- Assemble Cleaning Tool:
- Attach the Rotating Nozzle to the end of the shaft.
- Slide the shaft through the disc.
- Screw the valve onto the end of the shaft.
- Connect your air hose to the valve.
- Prepare Filter Tubes:
- Cut the provided tubes to match the pipe diameter.
- Press the tubes into the Rotating Nozzle. (You have multiple tubes to accommodate different filter sizes.)
Using the Dust Contained Set
Additional Notes for Axial Filters
If your filter is open at both ends (axial seal), cover the bottom end with cardboard cut to size and taped in place before inserting it into the unit.
Cleaning instructions
- Vacuum Preparation: Turn on the vacuum with the disc removed from the containment unit.
- Insert Filter: Place the dirty filter in the centre of the plate inside the unit.
- Turn Off Vacuum: Switch off the vacuum.
- Insert Cleaning Tool: Place the disc (with the shaft and nozzle attached) into the dust containment unit.
- Vacuum On, Valve Open: Turn on the vacuum and open the valve on the cleaning nozzle.
- Clean Filter: Slowly stroke the cleaning nozzle up and down the filter until a significant amount of dust has been removed.
- Close Valve: Close the valve on the cleaning nozzle.
- Turn Off Vacuum: Switch off the vacuum.
- Remove Tool: Lift out the disc with the cleaning tool.
- Remove Filter: Turn on the vacuum and remove the filter. This will help remove any remaining dust.
- Store Filter: Wrap the cartridge filter in a bag for storage and reinstallation.
Air Filter Cleaner Tool Kit Installation Guide
AFC Tool Kit Installation page
Click on the icon to view the installation page
Warranty
Air Filter Cleaner warrants our craftsmanship and products solely. Please forward your concerns to our service email info@siquaysolutions.com.au. Please provide date of purchase as well proof or purchase when referencing your request.